FEATURES 1. Thick-walled square tube welded, artificial aging bed, sturdy, no deformation, good rigidity. (2) a reasonable platform design, tops, 10mm steel erection after finishing the installation through the bed surface, installed on it and then after finishing the cast iron cover to protect vertical steel rack enclosures, so that in high strength steel plate under the flame does not damaged, the double tops maintain flatness within 0 ~ 1.5mm. 3. Reasonable slope drain material design, so that the processing is completed workpieces and debris along the ramp down to the sides of the rack feet, safe and convenient. 4 overall configuration of Taiwan by Panasonic servo motor servo reducer with precision rack and pinion, ensure low noise, stable and accurate coordinate movement performance. 5 using the U.S. Treasure / Thermal Dynamics (optional) power supply and with high sensitivity arc voltage height controller to automatically adjust select the best cutting distance to ensure the accuracy of the workpiece cutting. 6 perfectly reasonable design and high-precision cut out of thick cleansing of the workpiece is shaped plate cutting the best choice. Technical Parameters 13251530 processing materials iron, aluminum, galvanized sheet, white steel plate, titanium plate processing area 1300 × 2500mm 1500 × 3000mm Processing thickness 0.5-50mm (according to the actual cutting requires optional) plasma current 15-200A (based on actual Optional cutting conditions) Cutting speed 0-8m/min 0-8m/min air speed 0-50m/min 0-50m/min Power 8.5KW-10.5KW 8.5KW-10.5KW Input voltage three-phase 380V 3-phase 380V power supply Frequency 50HZ 50HZ file transfer mode USB interface USB interface arc method non-contact arc non-contact arc